Viking K-1900-7 Hot Line Phone Without Keypad

The Viking K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone dial and will not auto-dial on incoming calls. Viking K-1900-7 Features: Auto dials 1 (up to 32 digits) programmable speed dial number Touch tone or pulse dialing Non-volatile E2 memory (no batteries required) Operates on analog PABX and key system extensions or analog Centrex and C.O. lines Programmable 6 digit security code Touch tone programmable Vandal resistant Programmable pre-dial pause Blocks fraudulent calls from hand held pocket dialers Hearing aid compatible amplified handset with sealed push button volume control 1/8” heavy gauge stainless steel panel housing Armored cable Heavy duty handset All metal cradle Telephone line powered Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors If a ringer is required, use Viking Single Line Loud Ringer and Door Chime VK-SR-1 UPC Codes: 615687220940 615687223217 GTIN: 615687220940 615687223217 $256.37

source https://www.vikingtelecomsolutions.com/viking-k-1900-7-hot-line-phone-without-keypad.html

Viking PI-150W 12VDC Source (Discontinued)

The Viking 12VDC Source converts 12 Volts DC to 115 Volts AC with a maximum continuous output power of 150 Watts. The PI-150W will allow you to power Viking products or other 115V AC equipment of less than 150 watts from your vehicle, boat, RV, solar panel or other available 12V DC source. Features: 150 Watt continuous / 300 Watt surge output power Male cigarette lighter plug Single power receptacle with ground Lighted output power switch Low battery voltage alarm Automatic low battery voltage shut down 30 Amp input fuse High efficiency/ low operating current $57.15

source https://www.vikingtelecomsolutions.com/viking-pi-150w-12vdc-source.html

Viking CL-RFT RF Transmitter / Repeater for CL Series Wireless Clocks

RF Transmitter / Repeater for CL Series Wireless Clocks. Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. CL-RFT Transmitter / Repeater Features: Transmits the CTG-2 RS485 clock sync data wirelessly to the CL Series wireless clocks Can be configured as a wireless repeater to extend RF transmit range Compact, slim design makes it versatile for mounting Powerful transmission range: Up to 2000 meters in open space Can wirelessly receive and transmit data LEDs for indication of transmission and/or receipt of RS485 signal Powerful 30dBm transmission 915 – 928 MHz frequency-hopping technology eliminates interference with other wireless products and requires no FCC license Input Voltage: 85 - 230 Volts AC Input: RS485 from model CTG-2 Housing: Smooth surface metal enclosure Color: Black Antenna Length: 7” (17.78cm) FCC Compliant $648.12

source https://www.vikingtelecomsolutions.com/viking-cl-rft-rf-transmitter-repeater-for-cl-series-wireless-clocks.html

Viking SL-2-EWP LED Strobe/Beacon Visual Indicator with Enhanced Weather Protection

The SL-2-EWP is a 360° programmable LED strobe and/or beacon visual indicator with Enhanced Weather Protection. Strobe/Beacon Features: Over 57,000 hour (6.5 year) light source life to 70% light output 4 Programmable Flash Patterns: Single Flash Double Flash Quad Flash Flicker Flash 6 Programmable Beacon and Strobe brightness settings Immune to shock and vibration Low current draw Shatter resistant blue polycarbonate lens The model SL-2-EWP includes Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming For Standard Weather Protection version see VIK-SL-2 Dimensions: 4.41" diameter x 2.76" $139.78

source https://www.vikingtelecomsolutions.com/viking-sl-2-ewp-led-strobe-beacon-visual-indicator-with-enhanced-weather-protection.html

Viking E-32-EWP Stainless Steel Handsfree Speaker Phone with Dialer

The E-32-EWP handsfree speaker phone is designed to provide quick and reliable handsfree communication and can be connected directly to a CO line or analog PABX / KSU station. E-32-EWP Fetaures: Automatic Noise Canceling (ANC) feature for proper operation in noisy environments Telephone line powered Non-volatile memory, no batteries required Blue off-hook LED indicator Dials up to 5 emergency numbers Cycles through backup phone numbers on busy or ring-no-answer Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command Selectable auto-answer feature for monitoring Extended temperature range (-15°F to 130°F) Flush mounts in a standard double gang box (not included) Vandal Resistant Features: 14 gauge louvered 316 brushed stainless steel faceplate with permanent laser etched graphics Speaker / mic screen Heavy duty metal “Call” button T-10 Torx security mounting screws and drive bit Weather Resistant Features: Enhanced Weather Protection designed to meet IP66 Ingress Protection Rating Marine grade 316 stainless steel faceplate, screws and push button switch Switch internally sealed per IP67 Mylar speaker Self draining mic mount Faceplate, mic and speaker gaskets $332.41

source https://www.vikingtelecomsolutions.com/viking-e-32-ewp-stainless-steel-handsfree-speaker-phone-with-dialer.html

Viking E-1600-45A-EWP A.D.A.Yellow Emergency/Elevator Phone

The Viking E-1600-45A-EWP A.D.A.Yellow Emergency/Elevator Phone is a compact, vandal resistant package with a steel push button. It is designed to provide quick and reliable handsfree communication for any standard analog telephone line or analog phone system station port. It meets ADA requirements for elevator/ emergency telephones, and can be programmed from any Touch Tone phone. Viking E-1600-45A-EWP Features: Can automatically light ""call connected"" LED for hearing impaired Transmits a unique location I.D. code or voice announcement Grade 2 Braille label for visually impaired Has ""Emergency"" written vertically down the side Non-volatile digital voice announcer with 16 seconds of voice memory Non-volatile E2 memory Advanced call progress detection Handsfree operation Phone line powered Touch Tone or pulse dialing Dials up to 5 emergency numbers Cycles through backup emergency and non-emergency numbers on busy or no-answer Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command Programmable to auto-answer on incoming calls Remotely programmable Extended temperature range (-15°F to 130°F) Surface mount or mount on standard junction and single gang electrical boxes Central station monitoring capability (dials 2 numbers) Separate central station voice speed dial number Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors Material: .062” (16 gauge) steel with yellow powder paint E-1600A-BLT-EWP GTIN 0615687222432 UPC Codes: 615687221565 615687222432 $368.86

source https://www.vikingtelecomsolutions.com/viking-e-1600-45a-ewp-a-d-a-yellow-emergency-elevator-phone.html

Viking E-1600A-TP-EWP ADA Compliant Emergency Phone for Talk-A-Phone applications

Viking E-1600A-TP-EWP Direct Physical Replacement for Talk-A-Phone Model ETP-400(V) Panel Phone. For use with Talk-A-Phone tower, pedestal, surface, wall and flush mount enclosures. Code Blue towers require redrilling and tapping. Viking E-1600A-TP-EWP Features: Can automatically light "call connected" LED for hearing impaired Transmits a unique location I.D. code or voice announcement Meets ADA requirements for emergency phones Grade 2 Braille label for visually impaired Non-volatile digital voice announcer with 16 seconds of voice memory Provides contact or switched 12V DC for controlling a strobe light Advanced call progress detection Handsfree operation Phone line powered emergency phone (LDB 3 requires power) Non volatile memory (no batteries required) Touch tone or pulse dialing Dials up to 5 emergency numbers Cycles through backup emergency and non emergency numbers on busy or no answer Hangs up on CPC, silence, busy signal, dial tone, time out or touch tone command Programmable to auto answer on incoming calls Remotely programmable Extended temperature range ( 15°F to 130°F) Central station monitoring capability (dials 2 numbers) Separate central station voice speed dial number High visibility, vandal and weather resistant Two button version dials up to 3 additional numbers for general info or directions Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors $546.74

source https://www.vikingtelecomsolutions.com/viking-e-1600a-tp-ewp-ada-compliant-emergency-phone-for-talk-a-phone-applications.html