Viking BLK-3-EWP Line Status Strobe Kit (Discontinued)

Line Status Strobe Kit provides high visibility indication of analog line status through a high powered one million candle power strobe light. It is the ideal solution for the hearing impaired and can be used equally well in loud warehouses or factories, where ringing phones can not be heard. BLK-3-EWP can also be used to add emergency notification to pre-existing emergency phones by turning on the strobe light when the emergency phone is in use. See Replacement: Model # BLK-4-EWP Applications: Ringing phone or TTY indication for the hearing impaired Ringing phone indication in loud warehouses and factories Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc. Alarm indication for security systems or alarm panels with phone dialers BLK-3-EWP Strobe Kit Features: LDB-3 control module with Enhanced Weather Protection (EWP) Polycarbonate lens Strobe and control module may be installed separately Long life 1 million candle power blue strobe light Flush mount or surface mount with weatherproof single gang box (included) 3/4" knockouts for connecting conduit, etc. Can be configured to signal ringing off-hook or a combination of both ringing and off-hook (line in-use) One set of (NO) normally open and (NC) normally closed relay contacts provided Selectable ring cadence mode (strobe light will remain flashing between rings) Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.) On/off switches for ring detection and off-hook/loop detection Disable input, ideal for use with two-button emergency phones (E-1600-20A), will not activate strobe light on "Info" calls Replaces BLK-1 Package Contains: (1) LDB-3 Control Module (1) Blue Strobe Light (1) 12V DC Power Adapter (13) Gel Filled Butt Connectors (1) Single Gang Weatherproof Mounting Box with Gaskets and Hardware $155.91

source https://www.vikingtelecomsolutions.com/viking-blk-3-ewp-line-status-strobe-kit.html

Viking Q170600 Ringer for Viking K Series Phones

Ringer for Viking K Series Phones provides a loud electronic warble each time standard ring voltage is detected. It includes a capacitor and a ringer. $26.16

source https://www.vikingtelecomsolutions.com/viking-q170600-ringer-for-viking-k-series-phones.html

Viking VE-GNP Gooseneck Pedestal

Gooseneck Pedestal is designed to be used with any of the VE-series backboxes and is ideal for drive up communications. VE-GNP Features: Mounts to a floor, or concrete with 4 available bolt holes Height: 42" Material: CRS Finish: UV stable black powder paint GTIN 0615687222067 UPC Code 615687222067 Note: The VE-3x5 is not compatible with VE-GNP pedestal. $117.72

source https://www.vikingtelecomsolutions.com/viking-ve-gnp-gooseneck-pedestal.html

Viking LC-3 Three Line Concentrator

Three Line Concentrator allows up to three emergency phones to share a single line. LC-3 Features: Automatic answering of inbound calls Inbound calls can be touch tone transferred to any port Connects up to 3 emergency phones, or 2 phones can share a line with a phone system Fire floor phone port provided to meet elevator code Modular connection for easy installation During power outages, the emergency phones are all connected to phone line Share one line with three emergency phones $232.52

source https://www.vikingtelecomsolutions.com/viking-lc-3-three-line-concentrator.html

Viking SLP-1 Single Line Paging Adapter

Single Line Paging Adapter allows user to page family members or co-workers from any phone in the home or small office. The pages can be hard over the same speakers that are installed for music distribution. Viking SLP-1 Features: Whole house/small business paging from existing phones Phone to phone intercom Page from several different phone lines by connecting multiple units Can provide background music from an external source Background music mute (automatic during paging or touch tone selectable while on a call) Selectable loud ringing (electronic warble over speakers) Doorbell switch input (lighted or non-lighted) for activating door chime (ding-dong sound over speakers) Switch selectable On-Hold alarm tones Stereo pre-amp input and line level output for use with receivers and high wattage amplifiers Page trigger output (12V signal for enabling paging source input on multi-source amps) Bypass code ignores all touch tones on next off-hook allowing user to steer through auto attendants Unique front and back door chimes when used with Door Entry Doorbox and CCTV Video Controller (C-1000B) or Advanced Door and Gate Entry Phone Controller (Model #: C-2000B) Simple control commands with no touch tone programming Music on hold Caller on hold Pre-amp volume control Loud ringing/night bell UL listed power adapter provided Manufacturer Waaranty 2 year limited $166.12

source https://www.vikingtelecomsolutions.com/viking-slp-1-single-line-paging-adapter.html

Viking PTR-1 Professional Telecom Recording Kit

Professional Telecom Recording Kit is designed to record both sides of the conversation on a phone line using a standard digital or tape style recorder. Features: No power required for recorder interface module Works with virtually any tape or digital recorder with VOX and AGC circuits Recorder only runs during conversation Record all conversations on a phone line, only on your phone or only those you wish to record Compact unit is easy to use Both sides of the conversation record at about the same level Package Contents: (1) Interface module (1) Seven foot recorder cable with 1/8” plugs (1) Handset “T” adapter (1) Modular telephone cord $36.63

source https://www.vikingtelecomsolutions.com/viking-ptr-1-professional-telecom-recording-kit.html

Viking K-202-DVA Two-Input Voice Alarm Dialer

Two-Input Voice Alarm Dialer is a fully programmable two-input, multi-number auto dialer, designed for emergency and non-emergency message notification. Features: Non-volatile E2 memory (no batteries required) Stores up to seven 32-digit phone numbers (fourteen 32-digit numbers total) 2 minutes of record time (1 minute per input) Programmable message repeat counter Programmable lap counter Two inputs programmable normally open or normally closed and enabled or disabled Programmable ring delay for remote programming and alarm polling Programmable qualifier timer for each input (time for an event to be qualified as an alarm) Programmable resume timer for each input (time following reset for input to become active again) Call progress detection capability with normal and fast busy, call pickup, CPC, and ring-no-answer detection as an alarm dialer Programmable ringback limit for call progress Remote security and access codes Local or remote programming and recording Phone numbers may be programmed as pager numbers (no voice message played) $167.59

source https://www.vikingtelecomsolutions.com/viking-k-202-dva-two-input-voice-alarm-dialer.html

Viking PAN-1 Panasonic Doorphone Station Adapter

Panasonic Doorphone Station Adapter allows a Viking “E” series speaker phone to interface with Panasonic doorphone / door station cards. Features: Interfaces in place of a Panasonic KX-T30865 or KX-T7775 doorphone All Panasonic doorphone / door station card programming options and features may still be used Increased audio performance over Panasonic’s doorphones Compatible with the following Viking Entry Phones: Flush Mount Speakerphone (Model #: E-10A) Surface Mount Entry Phone (Model #: E-20B) Flush Mount Stainless Steel Speakerphone (Model #: E-30) Stainless Steel Video Speakerphone (Model #: E-35) Compact Single-Gang Entry Phone with LED (Model #: E-40) Compact Entry Phone with Color Video Camera (Model #: E-50) Double gang entry phone with LED (Model #: E-60) Double Gang Entry Phones with Color Video Camera (Model #: E-65) $71.28

source https://www.vikingtelecomsolutions.com/viking-pan-1-panasonic-doorphone-station-adapter.html

Viking PROXCARD-ISO-BASE HID Compatible 125KHz Proximity Card (Discontinued)

Non-contact security card that can be placed in front of the Viking HID-1 Card Reader to allow entrance into a secured area. The PROXCARD-ISO is a thin 0.032” thick flexible “ISO” style proximity card. Much like a credit card, the PROXCARD-ISO is perfect for storing in your wallet. See Replacement  PRX-C-ISO Proximity Card Features: Industry standard 125KHz RFID technology 26 bit Wiegand format Non-contact reading for long life Use with the Viking PROX-1, 2, 3, HID-2 or any HID compatible proximity card reader Thin 0.032” flexible “ISO” style card Up to 253 facility codes and 65,534 card numbers available Cannot be erased by a magnet As low as $7.26

source https://www.vikingtelecomsolutions.com/viking-proxcard-iso-base-hid-compatible-125khz-proximity-card.html

Viking SA-TBA Tile Bridge for Ceiling Speakers

The SA-TBA is a tile bridge designed to mount 8 inch loud speaker and bridges both 2 ft x 2 ft and 2 ft x 4 ft ceiling tiles. SA-TBA Features: Fits standard 8 inch ceiling speakers Specifically designed for use with Viking Models SA-1S, 30AE, 35AE, and 40AE ceiling speakers Bridges both 2 ft x 2 ft and 2 ft x 4 ft ceiling tiles Threaded mounting holes for easy installation 24 gauge galvanized steel Dimensions: 359mm x 600mm (14.1” x 23.6”) Material: 24 gauge CRS Finish: Rust-resistant electro galvanized $23.92

source https://www.vikingtelecomsolutions.com/viking-sa-tba-tile-bridge-for-ceiling-speakers.html

Viking E-35-IP-EWP ADA Compliant VoIP Emergency Phones with Built-In Dialer and Digital Voice Announcer

E-35-IP Features: Built-In high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature Self diagnostic reports via email (testing com, mic, speaker & switch) Automatic polling and programming software included 2 Amp relay contacts for door/gate or SL-2 strobe light control Blue “Call” LED indicator SIP compatible PoE powered (class 1, Automatic Noise Canceling (ANC) feature for proper operation in noisy environments VoIP eliminates the need for “Push to Talk” mode Network downloadable firmware Handsfree operation Marine grade 316 stainless steel prevents corrosion Programmable to dial up to 5 numbers on busy or ring no answer and provide color analog CCTV video of who is at your door or gate Cycles through backup phone numbers on busy or no-answer Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating Hangs up on busy signal, time-out or touch tone command Remotely programmable Extended temperature range (-30°F to 130°F) Replacement board available Volume adjustments for microphone and speaker E-35-IP is flush mountable using the included rough-in box or can be surface mounted using an optional VE-5X5 Surface Mount Box Optional PB-100 Polling System available Optional VIK-SL-2 or BLK-4-EWP strobe light kit available Specifications: Power: PoE class 1 ( Dimensions: See Installation and Specifications Operating Temperature: -26° C to 54° C (-15°F to 130°F) Humidity - Standard Products: 5% to 95% non-condensing Humidity - EWP Products: Up to 100% Audio Codecs: G711u, G711a, G722 Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors Compatibility List: 3COM VCX 3CX Aastra Asterisk Atcom Avaya IP Office BlueBox Brekeke Cisco Unified Communications Manager (CUCM) Freeswitch Grandstream iptel.org Kamailio MetaSwitch OfficeSIP OpenSIPS Panasonic Samsung Communications Manager (SCM) ShoreTel Siemens Communications Server (SCS) SIP Express Router (SER) sip.antisip.com Snom PBX Sonus Switchvox Teksip Toshiba VoIP.ms Vonage $616.38

source https://www.vikingtelecomsolutions.com/viking-e-35-ip-ewp-ada-compliant-voip-emergency-phones-with-built-in-dialer-and-digital-voice-announcer.html

Viking VE-9X20R 9x20 Weather-Proof Enclosure for K-1500-7, K-1900-7 and K-1900-8

Viking VE-9X20R Weather-Proof Enclosure is constructed of cast aluminum and is made for years of outdoor service. Viking VE-9X20R Features: Heavy-duty 319 cast aluminum construction Powder coated for durability and UV stability Drip guard and gasket sealed door 0.020” thick stamped aluminum “Telephone” label with scratch resistant UV stable clear coat 1/2” NPT conduit openings on top and bottom Comes with or without a standard adapter panel Available in emergency red, safety yellow or matte black Compatible with: With Mounting Panel Option: K-1500-7 K-1900-7 K-1900-8 Without Mounting Panel Option: Basic Enclosure - No internal mounting panel $462.00

source https://www.vikingtelecomsolutions.com/viking-ve-9x20r-9x20-weather-proof-enclosure-for-k-1500-7-k-1900-7-and-k-1900-8.html

Viking LB-50 L-Bracket for E-50 Entry Phone with Color Video Camera

L-Bracket for Compact Entry Phone with Color Video Camera ( E-50). $10.35

source https://www.vikingtelecomsolutions.com/viking-lb-50-l-bracket-for-e-50-entry-phone-with-color-video-camera.html

Viking LDB-3 Advanced Loop and Ring Detect Board

Advanced Loop and Ring Detect Board monitors an analog phone line for ringing or an off hook condition. Features: Ideal for monitoring line status and providing a visual indication of it On/off switches for ring detection and off hook/loop detection Detects ring voltage and loop connect Screw terminal connections Wall mountable with foam tape (included) or screws (not included) Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.) One set of (NO) normally open and (NC) normally closed relay contacts provided Disable input, ideal for use with two-button emergency phones, will not activate relay on "Info" calls 12V DC power adapter included Minimum Loop Current: 15 mA Disable/Info Switch Input: 50mA/80mW maximum Ringer Equivalence: 0.5 A REN Connections: 10 pin screw terminal block $51.02

source https://www.vikingtelecomsolutions.com/viking-ldb-3-advanced-loop-and-ring-detect-board.html

Viking ACD-10-EB Expansion Board For ACD-10 (Discontinued)

Expansion Board For ACD-10 is an expandable option for Stand-A-Lone ACD/UCD (Model #: ACD-10), which allows for an expansion from 6 to 10 stations. It also offers the option to add Transfer Only stations, which can be used as a tie line to transfer calls to another phone system, or be used by managers, billing agents or any other personnel that should not get inbound calls, but is available to receive calls tranferred form any agent. Features: Adds four more stations to an ACD-10 Add Transfer Only feature which prevents incoming calls from ringing through Calls distributed by either ACD (Automatic Call Distributor), UCD (Uniform Call Distributor), hunt group, or ring group protocols No KSU, PABX, ring generator or remote display needed. Call screening option Custom ringing intercom, transfer and 3-way calling Night mode Local and remote programming and recording Detects and regenerates CPC signals Direct call pick-up Statistics available through RS-232 port ACD-10 is expandable from 6 to 10 station ACD-10-EB $305.09

source https://www.vikingtelecomsolutions.com/viking-acd-10-eb-expansion-board-for-acd-10.html

Viking ERAM-4M 4 Minute Memory Expansion Kit for AES-2000F and AES-2000S

Memory Expansion Kit is designed to expand the voice record memory of the AES-2000 using non-volatile memory. The number of chips required is dependant on the desired number of names. The AES-2000 is factory configured for 75 names, expandable to accommodate up to 525 names. Features: Kit includes one 28 pin non-volatile memory chip which provides four minutes of record time, equivalent to 75 names 16 position, 0.5 inch high back-lit display Non-volatile digital voice announcer Factory configured to handle 75 apartments Field expandable to 525 apartments Non-volatile data memory for names, phone numbers and access codes Stainless steel keypad for direct code entry Volume control TTY jack for connection to personal TTY Postal lock input Built-in modem for remote programming Keyless entry capability $26.88

source https://www.vikingtelecomsolutions.com/viking-eram-4m-4-minute-memory-expansion-kit-for-aes-2000f-and-aes-2000s.html

Viking PI-1A Telecom Paging Interface

The Viking PI-1A Telecom Paging Interface allows one to provide paging from nearly any phone system instead of from a microphone. Paging interface can also provide background music and electronic night bell over the audio system. Viking PI-1A Features: Floating 600 ohm output Selectable 22V DC talk battery for interfacing with unused phone system line input/trunk ports Adjustable ring volume Paging port interface Integrate public address system with nearly any phone system Ringing analog line input for night bell Adjustable ring pitch Contact closure input for night bell DPDT normally open and normally closed VOX activated contacts for cutting out background music Adjustable VOX contact time-out Electronic night bell from ringing line or contact closure Cut out background music during paging Adjustable VOX trigger sensitivity $83.72

source https://www.vikingtelecomsolutions.com/viking-pi-1a-telecom-paging-interface.html

Viking 300AE 30 Watt 8 Ohm 70 Volt Paging Horn

The Viking 300AE paging horn provides a direct voice coil connection for use with Viking 8 ohm paging systems. The 300AE paging horn also provides a built-in step-down transformer for use with 25V or 70V paging systems such as Viking models PA-30 and PA-60. The transformer has a range of power taps that are selectable with a 6 position rotary switch. Viking 300Ae Features: Large 10 inch diameter horn 30 watt power handling Direct 8 ohm connection or step-down transformer connection Compatible with 25V or 70V paging systems Weather resistant rugged gray plastic housing Fully adjustable mounting hardware included Wide frequency response Greater intelligibility of voice pages Suitable for background music High efficiency Specifications: Power Handling: 30 Watts Direct Impedance: 8 Ohms 70V Taps: 4W, 8W, 15W, and 30W 25V Taps: .5W, 1W, 2W, 4W, 8W, and 15W Viking Taps: 1W, 2W, 4W, 8W, 15W, and 30W Frequency Response: 300 Hz to 9000 Hz Sound Pressure Level: 107dB 1W/1m, 117dB 30W/1m Dimensions: 254mm (10”) diameter, 292mm (11.5”) Long $79.56

source https://www.vikingtelecomsolutions.com/viking-300ae-30-watt-8-ohm-70-volt-paging-horn.html

Viking E-1600-ASTIPEWP ADA Compliant VoIP Tower Phone with Blue LED Beacon and Strobe Light

At the simple push of a button, the Tower Phone will initiate a call to your emergency personnel and send a digital announcement to identify the location of the emergency call. View IP SIP System: Compatibility List Emergency Tower Features: Self diagnostic reports via email (testing com, mic, speaker, and switch) Automatic polling and programming software included SIP compatible (see page 2 for list of compatible IP-PBX phone systems) PoE powered (class 1, Automatic Noise Canceling (ANC) for operation in noisy environments VoIP eliminates the need for “Push to Talk” mode Network downloadable firmware Meets ADA requirements for Emergency Phones Automatically lights the “Call Connected” LED Transmits a location I.D. or voice announcement Grade 2 Braille label for the visually impaired Non-volatile digital voice announcer with 28 seconds of voice memory Handsfree operation Marine grade 316 stainless steel prevents faceplate / push button corrosion Dials up to 5 emergency numbers Cycles through backup phone numbers on busy or no-answer Comes standard with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating Hangs up on busy signal, time-out or touch tone command Remotely programmable Extended temperature range (-40°F to 140°F) Optional PB-100 Polling System available $1,218.36

source https://www.vikingtelecomsolutions.com/viking-e-1600-astipewp-ada-compliant-voip-tower-phone-with-blue-led-beacon-and-strobe-light.html

Viking PAN-1A Panasonic Doorphone Station Adapter

Panasonic Doorphone Station Adapter allows a Viking “E” series speaker phone to interface with Panasonic doorphone / door station cards. Features: Interfaces in place of a Panasonic KX-T30865 or KX-T7775 doorphone Allows use of these Viking entry phones: E-10A Flush mount speaker phone E-20B Surface mount speaker phone E-30 Stainless steel speaker phone E-32 Stainless steel double gang box mount E-35 Stainless steel video speaker phone E-40 Compact door entry phone E-50 Compact video door entry phone E-60-SS Double gang entry phone E-65 Double gang video entry phone E-70-SS Double gang entry phone with built in prox card reader E-75-SS Double gang video entry phone with built in prox card reader All Panasonic doorphone / door station card programming options and features may still be used Increased audio performance over Panasonic’s doorphones Provides adjustable ringback tones to entry phone Provides CPC signal to entry phone Specifications: Power: 120V AC/13.8V AC 1.25A UL listed adapter provided Dimensions: 2.1” x 2.1” x 1.0” (53mm x 74mm x 25mm) Operating Temperature: 32°F to 90°F (0°C to 32°C) Humidity: 5% to 95% non-condensing Talk Battery: 40V DC Loop Current to Entry Phone: 25mA (typical) Ring Generation to Entry Phone: 40Hz square wave Maximum Run Length: 5280 ft / 1 mile (1610m ), 24 gauge Connections: (1) RJ-11 jack to connect with Panasonic card, and (4) screw terminals for power and entry phone connections Certifications: FCC Part 15 $73.14

source https://www.vikingtelecomsolutions.com/viking-pan-1a-panasonic-doorphone-station-adapter.html

Viking VE-9X12Y-0 Yellow 9x12 Heavy-Duty Outdoor Enclosure with Optional Telephone Label and No Adapter Panel

The Viking VE-9X12Y-0 9x12 Weather-Proof Enclosure is constructed of cast aluminum and is made for years of outdoor service. Viking VE-9X12Y-0 Features: Heavy-duty 319 cast aluminum construction Powder coated for durability and UV stability Drip guard and gasket sealed door 0.020” thick stamped aluminum “Telephone” label with scratch resistant UV stable clear coat 1/2” NPT conduit openings on top and bottom Adapter panel 1 has mounting holes for a standard RJ11 wall plate No mounting panel option for mounting other (non-Viking) telecom products Available in emergency red, safety yellow or matte black Viking VE-9X12Y-0 Applications Parking lots Maintenance areas Building exteriors Swimming pools Playgrounds Roadside help areas Viking VE-9X12Y-0 Viking VE-9X12Y-0 Specifications Dimensions: 9.375″ x 12.6″ x 7.45″ (238mm x 320mm x 189mm) Minimum Internal Clearance: 5.75″ x 10.0″ x 6.75″ (146mm x 254mm x 172mm) Material: 319 cast aluminum Finish: UV stable yellow powder paint Conduit Opening: 0.5″ NPT top and bottom with top plug NEMA Rating: Designed to meet NEMA / EEMAC Type 4, 4X and 12 requirements $200.64

source https://www.vikingtelecomsolutions.com/viking-ve-9x12y-0-9x12-yellow-weather-proof-enclosure-optional-telephone-label-and-no-adapter-panel.html

Viking E-50-BK-EWP Compact Entry Phone with Color Video Camera

Viking E-50-BK-EWP Compact Entry Phone with Color Video Camera is a compact, weather and vandal resistant speaker phone designed to provide two-way handsfree audio communication and color composite video. Viking E-50-BK-EWP Entry Phone Features: Built-in high resolution color video camera Wide viewing range, tilt/swivel adjustments, and wide operating temperature of -30° F to 150° F Audio and video transmission on one CAT5E cable Compact size allows it to be flush mounted in standard single gang electrical box Vandal resistant 18 gauge stainless steel faceplate Stainless steel push button Stainless steel speaker screen Scratch resistant powder coating Hex drive mounting screws Microphone and speaker volume controls Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out Selectable auto answer feature for monitoring Programmable VOX (mic/speaker) switching speed Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors Viking E-50 is available in finishes: Brushed stainless steel, oil rubbed bronze, polished brass, satin white, and satin black $523.20

source https://www.vikingtelecomsolutions.com/viking-e-50-bk-ewp-compact-entry-phone-with-color-video-camera.html

Viking LSD-2 Intelligent Line Sharing Device with Inbound Call Switching

Intelligent Line Sharing Device with Inbound Call Switching allows the user to share an existing phone line with an emergency phone or other priority alarm device. LSD-2 Features: Routes both incoming and outgoing calls Allows an emergency device to share a phone line with other devices (fax machines, phones, modems) Gives priority to the emergency devices Can be used on any C.O. line or analog PABX/KSU station Incoming calls routed to one of two ports by caller ID, distinctive ring or quick call back Status LED displays mode of operation Can store up to 12 caller ID numbers Provides busy signal to the phone port when an emergency device is in use Note: Caller ID is not passed through LSD-2 to the devices Important: When the emergency device is in use, the phone line is not available for normal use. Any additional emergency calls will have to be made on another phone line. For this reason the LSD-2 is not recommended for single line applications. $130.80

source https://www.vikingtelecomsolutions.com/viking-lsd-2-intelligent-line-sharing-device-with-inbound-call-switching.html

Viking E-1600A-BLT-EWP ADA Compliant Emergency Tower Phone

The Viking E-1600A-BLT-EWPADA Compliant Emergency Tower Phone combines quick and reliable handsfree communication with a high visibility enclosure and pulsating strobe light. Viking E-1600A-BLT-EWP Features: Telephone line powered telephone (will work during power failure) Transmits a unique location I.D. code or voice announcement Grade 2 Braille label for visually impaired Non-volatile digital voice announcer with 16 seconds of voice memory Non-volatile E2 memory Advanced call progress detection Handsfree operation Touch tone or pulse dialing Dials up to 5 emergency numbers Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command Programmable to auto-answer on incoming calls Remotely programmable Extended temperature range (-15°F to 130°F) Standard with EWP (enhanced weather protection) Central station monitoring capability (dials 2 numbers) Separate central station voice speed dial number 1 million candle power blue strobe light Surface mountable to walls or posts $1,030.70

source https://www.vikingtelecomsolutions.com/viking-e-1600a-blt-ewp-ada-compliant-emergency-tower-phone.html

Viking PB-1 Emergency Phone Panic Button Kit

Emergency Phone Panic Button Kit connects to a Viking 1600A Series Emergency Phone to provide a one-way talk path to the pre-programmed number when used. Applications: Courtrooms Bank tellers Gas stations Motel reception desks All night restaurants Convenience stores Panic Button Features: LED to indicate call connected One-way talk path for listening without audible indication Unobtrusive and mounts anywhere at any angle with supplied foam tape Provides security and peace of mind Cord Length: 7 ft $19.62

source https://www.vikingtelecomsolutions.com/viking-pb-1-emergency-phone-panic-button-kit.html

Viking SRC-1 Secure Touchtone Relay Controller

Secure Touch Tone Relay Controller enables a standard touch tone phone to securely operate a set of timed relay contacts to control a doorstrike or gate controller at a remote location. Features: User touch tone programmable Non-volatile memory retains programming during power outage 6 digit programmable security code (to access programming) Switchable 32V talk battery Programmable relay activation time Programmable relay activation code (1-2 digits or **) Operates on any 12-24V AC/DC power source LED’s for power / relay activation Programmable allow / restrict for dialing from entry phone Eliminates possibility of dialing activation code through entry phone using a hand held touch tone dialer Programmable allow / restrict for keyless entry from entry phone 32 keyless entry codes Trigger input for contact closure from postal lock, request to exit, etc. 12V DC power adapter provided $146.50

source https://www.vikingtelecomsolutions.com/viking-src-1-secure-touchtone-relay-controller.html

Viking K-600F Night Bell Over Paging Adapter

The K-600F eliminates the installation of multiple bells, relays, and power supplies, wherever night bells, loud ringing, or emergency tones are required. The K-600F provides an existing paging amplifier with a pleasant electronic warble tone each time it Night Bell Features: Requires no external power supply Powered by ring signal Provides tone over existing paging amplifiers Eliminates the need to install multiple bells, relays, and power supplies Terminals for automatic switching between paging audio and warble tone Auxiliary relay contacts provided Connects directly to ringing analog PABX/KSU stations with RJ11 or terminals Floating 600 ohm audio output LED indication of unit activation Volume and tone controls provided $67.64

source https://www.vikingtelecomsolutions.com/viking-k-600f-night-bell-over-paging-adapter.html

Viking 40AE 15 Watt 8 Ohm Ceiling Speaker with Modern Look and Excellent Sound Quality

In office and restaurant environments, it is best to distribute sound more evenly. Using ceiling mounted speakers in close proximity offers the best distribution The 40AE paging speaker provides additional economical paging coverage to existing Viking paging units or to any system with an 8 ohm output. 40AE Features: Nominal Power: 15 Watts Impedance: 8 Ohms Dimensions: 270mm x 90mm (10.6” x 3.6”) Environmental: 5% to 95% non-condensing humidity Frequency Response: 85 Hz to 15,000 Hz $34.34

source https://www.vikingtelecomsolutions.com/viking-40ae-8-ohm-ceiling-speaker-with-integral-mounting-system.html

Viking VE-9X12R-0 9x12 Red Weather-Proof Enclosure with Optional Telephone Label and No Adapter Panel

The Viking VE-9X12R-0 9x12 Weather-Proof Enclosure is constructed of cast aluminum and is made for years of outdoor service. Viking VE-9X12R-0 Features: Heavy-duty 319 cast aluminum construction Powder coated for durability and UV stability Drip guard and gasket sealed door 0.020” thick stamped aluminum “Telephone” label with scratch resistant UV stable clear coat 1/2” NPT conduit openings on top and bottom Adapter panel 1 has mounting holes for a standard RJ11 wall plate No mounting panel option for mounting other (non-Viking) telecom products Available in emergency red, safety yellow or matte black Viking VE-9X12R-0 Applications Parking lots Maintenance areas Building exteriors Swimming pools Playgrounds Roadside help areas Viking VE-9X12R-0 Specifications Dimensions: 9.375″ x 12.6″ x 7.45″ (238mm x 320mm x 189mm) Minimum Internal Clearance: 5.75″ x 10.0″ x 6.75″ (146mm x 254mm x 172mm) Material: 319 cast aluminum Finish: UV stable red powder paint Conduit Opening: 0.5″ NPT top and bottom with top plug NEMA Rating: Designed to meet NEMA / EEMAC Type 4, 4X and 12 requirements $200.64

source https://www.vikingtelecomsolutions.com/viking-ve-9x12r-0-9x12-red-weather-proof-enclosure-optional-telephone-label-and-no-adapter-panel.html

Viking E-50-BK Compact Entry Phone with Color Video Camera

Viking E-50-BK Compact Entry Phone with Color Video Camera is a compact, weather and vandal resistant speaker phone designed to provide two-way handsfree audio communication and color composite video. Viking E-50-BK Entry Phone Features: Built-in high resolution color video camera Wide viewing range, tilt/swivel adjustments, and wide operating temperature of -30° F to 150° F Audio and video transmission on one CAT5E cable Compact size allows it to be flush mounted in standard single gang electrical box Vandal resistant 18 gauge stainless steel faceplate Stainless steel push button Stainless steel speaker screen Scratch resistant powder coating Hex drive mounting screws Microphone and speaker volume controls Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out Selectable auto answer feature for monitoring Programmable VOX (mic/speaker) switching speed Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors Viking E-50 is available in finishes: Brushed stainless steel, oil rubbed bronze, polished brass, satin white, and satin black $401.56

source https://www.vikingtelecomsolutions.com/viking-e-50-bk-compact-entry-phone-with-color-video-camera.html

Viking ACD-10 Stand-A-Lone ACD/UCD (Discontinued)

Stand-A-Lone ACD/UCD is a distributor that will distribute calls from up to 10 incoming C.O./PABX lines to a maximum of 6 agents. If an agent is not available, it will play an announcement and place the call on hold for the next available agent. Custom ringing indicates to the agent if the call has been answered by the ACD-10. Features: Calls distributed by either ACD (Automatic Call Distributor), UCD (Uniform Call Distributor), hunt group, or ring group protocols No KSU, PABX, ring generator or remote display needed Three custom recordings stored in non-volatile memory: Day answer, Pacifier, Night answer Call screening option Custom ringing intercom, transfer and 3-way calling Night mode Local and remote programming and recording Detects and regenerates CPC signals Direct call pick-up Statistics available through RS-232 port Power: 120V AC/13.8V AC 1.25A Message Lengths: Day - 30 seconds; Night - 60 seconds; Pacifier - 10 seconds $1,861.44

source https://www.vikingtelecomsolutions.com/viking-acd-10-stand-a-lone-acd-ucd.html

Viking FXI-1A Universal Telecom / IP Paging Interface

Universal Telecom / IP Paging Interface allows one to provide paging from almost any type of phone system instead of from a microphone. Paging interface can also provide background music and electronic night bell over the audio system. Features: 800 Hz pre-announce page tone (on/off) Floating 600 ohm paging output with volume control Normally open or closed relay for external paging amp activation or interfacing paging amp with external background music source Calling party control (CPC) detection for immediate disconnect Compatible with 24 to 48 volt FXS operation Busy signal detect disconnect 2.5 to 5 second VOX silence disconnect timer Programmable VOX trigger sensitivity 16 or 36 second default disconnect timer Screw terminal block connections 30V DC talk battery for interfacing with FXO or unused phone system line input/trunk port Up to 6 units can be powered from one adapter in FXO or VOX mode No power supply required in FXS interface mode Suppresses background music during paging Select: FXO (loop start), FXS (ring trip) or paging port (VOX relay) interface mode $99.95

source https://www.vikingtelecomsolutions.com/viking-fxi-1a-universal-telecom-ip-paging-interface.html

Viking RC-4A Network Enabled Relay Controller

The Viking RC-4A Network Enabled Relay Controller provides networked control of four relays via an easy-to-use web interface. The same interface can be used to check the status of four contact closure inputs. Relays can be toggled on or off, or user-programmed timed closures can be activated. Viking RC-4A Features: Terminal strip connections for normally open, normally closed, and common for all four relays Relays can be toggled or timed closures of from 1 to 99 seconds can be activated Terminal strip connections for all four sensor inputs Notification by email or text message of sensor input state change Can be used as a secure remote relay for Viking VoIP series phones Remote Interaction: sensor change on one RC-4A triggers relay activation of a second RC-4A across network Ready-to-use webpage control interface Encrypted login Relay names, input names and input status can be customized on webpage Firmware remotely updatable Two levels of access based on login: Administrator (full access) Guest (programmable limits) Applications Remote Control of: Secure building entry Heating/cooling equipment Pumps and fans Security system Gates Lighting Emergency tones $204.05

source https://www.vikingtelecomsolutions.com/viking-rc-4a-network-enabled-relay-controller.html

Viking E-32 Stainless Steel Handsfree Speaker Phone with Dialer

The E-32 handsfree speaker phone is designed to provide quick and reliable handsfree communication and can be connected directly to a CO line or analog PABX / KSU station. E-32 Fetaures: Automatic Noise Canceling (ANC) feature for proper operation in noisy environments Telephone line powered Non-volatile memory, no batteries required Blue off-hook LED indicator Dials up to 5 emergency numbers Cycles through backup phone numbers on busy or ring-no-answer Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command Selectable auto-answer feature for monitoring Extended temperature range (-15°F to 130°F) Flush mounts in a standard double gang box (not included) Vandal Resistant Features: 14 gauge louvered 316 brushed stainless steel faceplate with permanent laser etched graphics Speaker / mic screen Heavy duty metal “Call” button T-10 Torx security mounting screws and drive bit Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch Switch internally sealed per IP67 Mylar speaker Self draining mic mount Faceplate, mic and speaker gaskets $200.01

source https://www.vikingtelecomsolutions.com/viking-e-32-stainless-steel-handsfree-speaker-phone-with-dialer.html

Viking E-1600A-TP2-EWP 2 Button ADA Compliant Emergency Phone for Talk-A-Phone applications

Viking E-1600A-TP2-EWP Direct Physical Replacement for Talk-A-Phone Model ETP-400(V) Panel Phone. For use with Talk-A-Phone tower, pedestal, surface, wall and flush mount enclosures. Code Blue towers require redrilling and tapping. Viking E-1600A-TP2-EWP Features: Can automatically light "call connected" LED for hearing impaired Transmits a unique location I.D. code or voice announcement Meets ADA requirements for emergency phones Grade 2 Braille label for visually impaired Non-volatile digital voice announcer with 16 seconds of voice memory Provides contact or switched 12V DC for controlling a strobe light Advanced call progress detection Handsfree operation Phone line powered emergency phone (LDB 3 requires power) Non volatile memory (no batteries required) Touch tone or pulse dialing Dials up to 5 emergency numbers Cycles through backup emergency and non emergency numbers on busy or no answer Hangs up on CPC, silence, busy signal, dial tone, time out or touch tone command Programmable to auto answer on incoming calls Remotely programmable Extended temperature range ( 15°F to 130°F) Central station monitoring capability (dials 2 numbers) Separate central station voice speed dial number High visibility, vandal and weather resistant Two button version dials up to 3 additional numbers for general info or directions Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors Direct Physical Replacement for Talk-A-Phone Model ETP-400(V) Panel Phone. For use with Talk-A-Phone tower, pedestal, surface, wall and flush mount enclosures. Code Blue towers require redrilling and tapping.Features:Can automatically light "call connected" LED for hearing impairedTransmits a unique location I.D. code or voice announcementMeets ADA requirements for emergency phonesGrade 2 Braille label for visually impairedNon-volatile digital voice announcer with 16 seconds of voice memoryProvides contact or switched 12V DC for controlling a strobe lightAdvanced call progress detectionHandsfree operationPhone line powered emergency phone (LDB 3 requires power)Non volatile memory (no batteries required)Touch tone or pulse dialingDials up to 5 emergency numbersCycles through backup emergency and non emergency numbers on busy or no answerHangs up on CPC, silence, busy signal, dial tone, time out or touch tone commandProgrammable to auto answer on incoming callsRemotely programmableExtended temperature range ( 15°F to 130°F)Central station monitoring capability (dials 2 numbers)Separate central station voice speed dial numberHigh visibility, vandal and weather resistantTwo button version dials up to 3 additional numbers for general info or directionsEnhanced weather protection (EWP) option ideal for outdoor or harsh environmentsEWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors $595.14

source https://www.vikingtelecomsolutions.com/viking-e-1600a-tp2-ewp-2-button-ada-compliant-emergency-phone-for-talk-a-phone-applications.html

Viking VE-9X12B-0 9x12 Black Heavy-Duty Weather-Proof Enclosure

The Viking VE-9X12B-0 Weather-Proof Enclosure is constructed of cast aluminum and is made for years of outdoor service. Viking VE-9X12B-0 Features: Heavy-duty 319 cast aluminum construction Powder coated for durability and UV stability Drip guard and gasket sealed door 0.020” thick stamped aluminum “Telephone” label with scratch resistant UV stable clear coat 1/2” NPT conduit openings on top and bottom Adapter panel 1 has mounting holes for a standard RJ11 wall plate No mounting panel option for mounting other (non-Viking) telecom products Available in emergency red, safety yellow or matte black Panel Options: Without Mounting Panel: Model # K-1500-7 Viking Panel Phone Model # K-1900-7 Viking Hot Line Phone Without Keypad Model # K-1900-8 Viking Vandal Resistant, Hot-Line Phone with Built-in KeypadBasic Enclosure - No internal mounting panelFor mounting other (non-Viking) telecom products Mounting Panel # 1: Model # E-1600A Emergency Elevator Phone (Red) Model # E-1600-03B Emergency Elevator Phone (Brushed Stainless Steel) Model # E-1600-45A Emergency Elevator Phone (Yellow) Model # E-1600-60A Emergency Elevator Phone (Blue) Model # E-20B Line Powered Surface Mount Handsfree Entry Phone Model # K-1500P-W No Dial Wall Phone Model # K-1900W-2 IT Programmable Hot Line Wall Phone Model # W-2000A Surface Mount Handsfree Doorbox Mounting Panel # 2: Model # E-10A Flush Mount Speakerphone Model # E-1600-20A ADA Compliant Emergency Speakerphone Model # E-1600-30A ADA Compliant Emergency Speakerphone Model # W-1000 Weather Resistant Outside Doorbox Model # E-30 Flush Mount Handsfree Entry Phone with Built-In Auto Dialer Model # E-30-PT Speakerphone with Push To Talk Button Model # E-35 Handsfree Speakerphone with Auto Dialer and Color Video Camera Model # E-60-SS Double Gang Entry Phone with LED Model # W-3000 Weather Resistant Outside Doorbox $200.64

source https://www.vikingtelecomsolutions.com/viking-ve-9x12b-0-9x12-black-heavy-duty-weather-proof-enclosure.html

Viking E-50-WH-EWP Compact Entry Phone with Color Video Camera

Viking E-50-WH-EWP Compact Entry Phone with Color Video Camera is a compact, weather and vandal resistant speaker phone designed to provide two-way handsfree audio communication and color composite video. Viking E-50-WH-EWP Entry Phone Features: Built-in high resolution color video camera Wide viewing range, tilt/swivel adjustments, and wide operating temperature of -30° F to 150° F Audio and video transmission on one CAT5E cable Compact size allows it to be flush mounted in standard single gang electrical box Vandal resistant 18 gauge stainless steel faceplate Stainless steel push button Stainless steel speaker screen Scratch resistant powder coating Hex drive mounting screws Microphone and speaker volume controls Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out Selectable auto answer feature for monitoring Programmable VOX (mic/speaker) switching speed Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors Viking E-50 is available in finishes: Brushed stainless steel, oil rubbed bronze, polished brass, satin white, and satin black $523.20

source https://www.vikingtelecomsolutions.com/viking-e-50-wh-ewp-compact-entry-phone-with-color-video-camera.html

Viking PS-48-RGA Talk Battery, Ring Voltage Supply

Talk Battery, Ring Voltage Power Supply provides telephone communication equipment with 48V DC talk battery. Features: Provides 48V talk battery Allows a phone system to sequence up to 30 ringing phones Provides 90V ring voltage Housed in convenient wall mount enclosure Comes with plug-in power supply $114.78

source https://www.vikingtelecomsolutions.com/viking-ps-48-rga-talk-battery-ring-voltage-supply.html

Viking K-1900-812L-IP Vandal Resistant VoIP Panel Phone with 12 inch Armored Handset Cable, Internal Lanyard, and Keypad

Viking K-1900-812L-IP Features: 12 gauge (0.105″ thick) 316 stainless steel panel with permanent laser etched graphics Armored handset cable Metal cradle Heavy duty metal keypad Hex drive mounting screws Weather Resistant Features: Marine grade 316 stainless steel faceplate Marine grade 316 stainless steel screws Internally sealed keypad Auto dials one programmable speed dial number (up to 32 digits) Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits) Touch tone or pulse dialing Non-volatile memory, no batteries required Operates on analog PABX and key system extensions or analog Centrex and CO lines Programmable 6 digit security code Touch tone programmable Armored 12″ handset cable with an internal stainless steel lanyard for additional cable strength Programmable pre-dial pause Blocks fraudulent calls from hand held pocket dialers Limited toll restriction in standard touch tone phone mode Hearing aid compatible amplified handset with sealed push button volume control Programmable default volume level Programmable volume control disable Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included Flush mount using the included rough-in box or surface mount using a Viking VE-5X10-NR or VE-5X5 surface mount box Viking K-1900-812L-IP Applications: Apartment Entry Phone Commercial Gate Entrance Courtesy Assistance Phone Customer Service Phone Hot-Line Phone Door Entry Phone Kiosk Phone with up to 250 number speed dialing Use with Viking PRX-1 or PRX-3 Proximity Card Readers Use with Viking LRT-4 Long Range Transmitter $640.76

source https://www.vikingtelecomsolutions.com/viking-k-1900-812l-ip-vandal-resistant-voip-panel-phone-with-12-inch-armored-handset-cable-internal-lanyard-and-keypad.html

Viking E-30 Flush Mount Handsfree Entry Phone with Built-In Auto Dialer

The Viking E-30 Flush Mount Handsfree Entry Phone with Built-In Auto Dialer is designed to provide quick and reliable handsfree communication and can be connected directly to a C.O. line or analog PABX/KSU station. Note: Operating Temperature: -26°C to 54°C (-15°F to 130°F). Humidity - E-30: 5% to 95% non-condensing Viking E-30 Entry Phone with Dialer Features: Handsfree operation Phone line powered Vandal resistant, stainless steel faceplate with heavy duty metal call button Non-volatile E2 memory (no batteries required) Touch tone or pulse dialing Programmable to dial up to 5 numbers on busy or ring no answer Red LED off-hook indicator Hangs up on CPC, silence, busy signal, return to dial tone, time out or a touch tone command Programmable to auto-answer on incoming calls Remotely programmable Weather resistant Rough in box included GTIN 0615687221169 UPC Code 61568721169 Available Models: Flush Mount Handsfree Entry Phone with Enhanced Weather Protection E-30-EWP Speakerphone with Push To Talk Button E-30-PT Speakerphone with Enhanced Weather Protection and Push to Talk Button E-30-PT-EWP $198.90

source https://www.vikingtelecomsolutions.com/viking-e-30-flush-mount-handsfree-entry-phone-with-built-in-auto-dialer.html

Viking K-1900-8 Vandal Resistant, Hot-Line Phone with Built-in Keypad

Vandal Resistant, Hot-Line Phone with Built-in Keypad can either automatically dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. Features: Auto dials 1 (up to 32 digits) programmable speed dial number Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers Touch tone or pulse dialing Touch tone keypad Operates on analog PABX and key system extensions or analog Centrex and C.O. lines Programmable 6 digit security code Touch Tone programmable Will not auto-dial on incoming calls Vandal resistant 1/8” heavy gauge stainless steel panel housing Armored cable Metal touch tone keypad Heavy duty handset All metal cradle Telephone line powered Programmable pre-dial pause Blocks fraudulent calls from hand held pocket dialers Limited toll restriction in dumb phone mode Hearing aid compatible amplified handset with sealed push button volume control Non-volatile E2 memory (no batteries required) Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors GTIN 0616174251980 UPC Code 616174251980 $402.87

source https://www.vikingtelecomsolutions.com/viking-k-1900-8-vandal-resistant-hot-line-phone-with-built-in-keypad.html

Viking K-1900-7 Hot Line Phone Without Keypad

The Viking K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone dial and will not auto-dial on incoming calls. Viking K-1900-7 Features: Auto dials 1 (up to 32 digits) programmable speed dial number Touch tone or pulse dialing Non-volatile E2 memory (no batteries required) Operates on analog PABX and key system extensions or analog Centrex and C.O. lines Programmable 6 digit security code Touch tone programmable Vandal resistant Programmable pre-dial pause Blocks fraudulent calls from hand held pocket dialers Hearing aid compatible amplified handset with sealed push button volume control 1/8” heavy gauge stainless steel panel housing Armored cable Heavy duty handset All metal cradle Telephone line powered Enhanced weather protection (EWP) option ideal for outdoor or harsh environments EWP option includes rubber gaskets and boots, silicon sealed connections, and gel-filled butt connectors If a ringer is required, use Viking Single Line Loud Ringer and Door Chime VK-SR-1 UPC Codes: 615687220940 615687223217 GTIN: 615687220940 615687223217 $256.37

source https://www.vikingtelecomsolutions.com/viking-k-1900-7-hot-line-phone-without-keypad.html